P600 diam 150mm 50 micro-abrasive discs 260L 7 holes

The product P600 diam 150mm 50 micro-abrasive discs 260L 7 holes is a set of high-quality abrasive discs designed for precise and efficient sanding of various surfaces. With a grit size of P600, these discs offer a fine sanding action to remove imperfections, defects and surface marks.

Technical specifications

• Type : micro-abrasive discs
• Diameter : 150 mm
• Particle size : P600
• Quantity : 50 discs per floor

Instructions for use

1. Preparing the sander : Make sure that the sander is correctly configured to accept micro-abrasive discs. Check that the holes in the sander match the holes on the 260L 7-hole discs. If necessary, adapt or install a suitable sanding pad.
2. Setting the speed : Consult the sander manufacturer's recommendations to determine the optimum speed for sanding with P600 micro-abrasive discs. Adjust the speed of the sander accordingly to obtain the best results.
3. Progressive sanding : Start by using slow, even strokes to sand the surface. Start with light pressure and gradually increase the pressure as required. Make several passes with the disc to obtain uniform sanding.
4. Progress control : Regularly check the condition of the sanded surface to assess the progress of the work. Make sure you cover the entire surface evenly and don't leave any unfinished areas.
5. Changing discs : When the micro-abrasive disc becomes worn or less effective, replace it with a new one. This will ensure optimum sanding and consistent results.
6. Finish : After sanding, use appropriate finishing techniques to achieve the desired surface. This may include the use of finer finishing discs, polishing or buffing products to achieve a smooth, glossy finish.

Don't hesitate to contact us for more information.