Sikkens Autowave car paint controller flop for two-coat clearcoat system:
These bodywork products are reserved for car repair professionals
Ref product : MM777
Supplier ref: 523109
Range : Autowave MM
Colour : Flop controller
Capacity : 1L
Autowave MM range of base colours provides excellent sprayability for solid OEM, metallic and pearl colour effects
Autowave MM 2.0 waterborne topcoat provides excellent hiding power, good distribution of metallic and pearlescent colours and excellent ease of application
System suitable for painting new parts or repairing two-coat opaque, pearlescent or metallic systems
Stir your Sikkens Autowave 2.0 pots thoroughly with your stirrers before preparing your ready-to-use car paint.
To dilute your products in the right proportions, use the Sikkens thinners.
Choosing your basecoat spraygun and adjusting your spray gun:
Choose a basecoat spraygun with an HVLP air cap and a 1.3 or 1.4 nozzle according to the recommendations of the spraygun manufacturers
Set your air pressure gauge to 0.6 0.7 bar at the air cap and between 1.7 and 2.2 bar at the nozzle.
Spraying method :
Sikkens Autowave 2.0 basecoats must be sprayed using the 2-coat wet paint and 1-coat placement method (whether matt basecoats or metallic colours)
Description
The Autowave MM 2.0 waterborne basecoat provides excellent hiding power, good distribution of metallic and pearlescent colours and excellent ease of application, making it suitable for painting
new elements or repairing two-coat opaque, pearlescent or metallic systems.
Autowave MM 2.0 must be combined with a specific Sikkens clearcoat to provide excellent environmental protection.
The Autowave MM range of base colours provides excellent sprayability for solid OEM duplication, metallic and pearl colour effects.
This system is suitable for painting new parts or repairing two-coat opaque, pearlescent or metallic systems. Fast-curing, single-component, water-based finishing system for two-coat metallic finishes. To enhance the effect of solid, metallic and pearlescent colours on standard upholstery. Specially designed for finishing passenger cars, but also suitable for finishing vans. Special additives optimise application flexibility.
Advantages
Easy to apply. Excellent covering properties. Excellent flow properties to save time and control metallization. Very thick clearcoat. Easy mixing and blending repair. High colour accuracy. Easy to dose. No surface binder. Three-month pot life for mixed colours. Can be covered with Sikkens clearcoats. Wide range of colours available.
